Universal Car/Garage Key Remote

Condition: New product

2019 Car Remote Control Wireless Control Switch Alarm Remote Control New Learning Code Universal Car Remote Wireless Control

Application areas:   Remote control switch, anti-theft alarm, remote control door lock, remote control electric shutter door and window, wireless remote control garage door, wireless remote control shutter, wireless remote control gate and so on.


By buying this product you can collect up to 1 loyalty point. Your cart will total 1 point that can be converted into a voucher of $0.20.

More info

1. Fixed code frequency is 433mhz (Std)
2. Universal remote control is compatible with electric door, garage remote control.
3. The device can store up to 4 different radio control codes.
4. 4 buttons for battery

Product Name: Car Remote Control
Working frequency: 433MHz
Working voltage: 12V
Working current: 12mA
Transmit power: >10mw
Launch distance: 80m (open space)
Frequency deviation: ±0.2MHz
Coding chip: PT2262, EV1527, HCS301
Oscillation resistance: 4.7M
Number of buttons: 4 keys
Modulation method: ASK
Size: about 55mm*30mm*13mm/2.16*1.18*0.51in

Packing List:

1* Remote Control(battery Included)


  Tips & Notices:   Match transmitter type: EV1527 If your transmitters are not using the encoding EV1527, they will not be connection successfully

Please do not use this remote control to clone other remote controls, you will lose the built-in EV1527 encoding and this remote control will not work.

2] Universal 433 Mhz/315MHZ RF Remote Control    

1., copy the chip:   Compitable for 2260, 2262, PT2264, 5326, SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918 series, 527, 1527, 2240, HCS101, HCS200/HCS201, HCS300/HCS301 (partial code), part of single chip microcomputer  

, clearn:   Press the ''A'' button and the ''B'' button at the same time, the LED indicator flashes three times, release the pressed ''B'' button, the ''A'' button is not loose, click the released ''B'' button three times, the LED indicates The light enters the fast flashing state. At this time, the memory data is completely cleared. After the data is cleared, the LED indicator is not lit no matter which button is pressed.

, the copy method:   One hand holds the original remote control, the other holds the remote control, and the two remotes are as close as possible. (ideally, the two remotes are placed on the desktop with the zero distance on the side.) 

Pressthe desired button. The LED indicator flashes rapidly after three flashes, and the copy is successful. The other buttons operate in the same way. Some remote controllers have a small transmitting power, and they should be back-to-back operated with the original remote control and the remote control. Some operating environments have interference, and should avoid the interference operation. If the copying is not good, copy it again after clearing the code. (It's especially important: the remote control on your hand must work properly and be the same frequency as our remote control)


Write a review


30 other products in the same category: