DC MPPT Solar Controller

Condition: New product

Solar Charge Controller MPPT. MPPT is generally a better grade controller, capable of harnessing more power with available sunlight. This controller is available in 30amp or 50amp.


By buying this product you can collect up to 12 loyalty points. Your cart will total 12 points that can be converted into a voucher of $2.40.

Data sheet

Power Input DC 12 and 24v
Power Output DC 12 and 24v

More info


  • 12V/24V MPPT Solar Charge Controller Solar Panel Battery Regulator Dual USB LCD Display

Automatic identification system voltage, 12/24V auto recognition.

Humanized LCD displaying and double button operation of man-machine interface.

Completed technical data for setup and modify.

High efficiency intelligent MPPT 3-stage charging mode.

The load control mode can be selected, the timer function can be reset for street light at night.

Discharge capacity control.

Discharge counter of ampere hour.

Working storage function: record the total run time of system, record timers of error during running time, record times of full charged battery.

Reliable over voltage protection, short circuit protection, over load protection, overcharge protection, over-discharge protection.

Accurate temperature compensation, correcting the charging and discharging voltage automatically, improving the battery lifetime.

Roundly reverse connected protection.

Solar panels, battery, solar charge controller positive poles are all connected together, adopting negative MOSFET in series control circuit.


  • Current: 30A, 50A, 70A (optional)

  • Rated Voltage: 12/24V

  • USB Output: 2.4A *2

  • Over Charge Current(V): 13.7V/*2 24V

  • Over Discharge Current(V): 10.5-11V/*2 24V

  • Temperature Compensation: -3mv/°/cell

  • Empty Load Wastage: <45mA

  • Loop Voltage Drop: <200mv

  • Display: LCD Display

  • Charging Type: MPPT

  • Waterproof Grade: IP32

  • Material: Plastic

  • Color: Black + Orange

  • Size: 17.5 * 14 * 4cm/6.9 * 5.5 * 1.6in(30A), 21 * 19.2 * 5.5cm/8.3 * 7.6 * 2.2in(50A), 22.8 * 20 * 5.5cm/9 * 7.9 * 2.2in(70A)

  • Package Weight: 480g-1284g


  • 1 * Solar Charge Controller (30amp)

  • 1 * User Manual



1. The function of controller is to protect voltage overshoot and overplay.

2. When the battery voltage is too low, the controller stops the output; after the solar panel is charged, the cell recovers to 12.6V.

3. 12.6V is the recovery discharge voltage.

4. The normal voltage of the controller is 10.7V to 13.7V. These two voltage fluctuations can be set manually.

If you have trouble in use, try adjusting the float voltage to 13.7V:

First, you need to press the MCU control button for about 3-4 seconds, and then there will be a management interface on the screen.

Second, you must press the add button on the screen until the voltage reaches 13.7V.

Finally, you need to press the MCU control button again, which will save the controller record data when the display does not flicker.

This item has the basic functions of MPPT and does not have all functions.


Write a review


Customers who bought this product also bought:

30 other products in the same category: